Samsung Galaxy mobile parts disassembly go ahead and pop out your SIM tray next go ahead and use a hairdryer or a blow dryer to heat the back of the phone so you can loosen up the adhesive. and make it easier to pry the back off then go ahead and use a plastic pry tool to work your way around the back of the phone and gently pry the back off. so here's your backplate you now have 15 Phillips screws you need to remove go ahead and remove those screws. now we're going to remove the wireless charging pad or coil so these contacts over here on the mainboard make a connection with the flex cable right here for the wireless charging pad. now let's go ahead and disconnect the battery cable and then we're gonna remove this top cover.
That's covering the board on the back of this cover you have a flex cable over here that has contacts on there which make a contact with the earpiece speaker over here and the board giving it signal let's go ahead and disconnect the rest of the cables that's disconnect the power button cable right over here now this connector front-facing camera cable now this seems to be something new Samsung is doing they did this on the Galaxy a Z flip as well basically the front-facing camera is to glue it down or held in place very firmly.